Training & Vendor Development
CMO Operations & Logistics
Multimedia Creation & Support CONFIDENTIAL
12.Dec.2006
22
Service Manual N71 RM-67/RM-112 Copyright © 2006 NOKIA Corporation. All rights reserved.
Approved 4.0
MGR
Page
(35)
1. Needed tools. 2. Insert the MICROPHONE. Avoid bending the spring contacts.
3. Use the DC-Plug to position the DC-JACK. 4. Place the CENTER SHIELD on the ENGINE BOARD.
5. Connect the LZ BT MODULE. 6. Insert the EARPIECE with the new IHF SPEAKER ADHESIVE into
the D-COVER IHF LID.
7. Fit the IHF LID in the D-COVER.
8. Place the IHF SHIELD on the D-COVER.
ASSEMBLY INSTRUCTION12.
DC-Plug 2mm
Metal tweezers
SRT-6
SS-51
Camera removal tool
Torx Plus
®
size 5 bit
Torque driver
To Next Page
Loading...
