Nokia N9 RM-696 - Page 16

Nokia N9 (RM-696)
L1L2 Service Manual
16
Nokia I nternal Use only | Copyright © 2012 Nokia | All rights reserved
V ersion 8.0
25) Remove the BATTERY.
26) Disconnect the MAIN FLEX connector with the
SS-93. Be careful not to damage the connector or
any nearby components.
27) Disconnect the AV FLEX connector with the
SS-93. Be careful not to damage the connector or
any nearby components.
28) Release the AV FLEX adhesive with the SS-93.
Be careful not to damage the connector or any
nearby components.
29) Disconnect the FRONT CAMERA FLEX
connector with the SS-93. Be careful not to
damage the connector or any nearby
components.
30) Unscrew the Torx+ size 5 screw. Do not use it
again. Discard it.