Nokia N9 RM-696 - Page 3

Nokia N9 (RM-696)
L1L2 Service Manual
3
Nokia I nternal Use only | Copyright © 2012 Nokia | All rights reserved
V ersion 8.0
CHANGE HISTORY
Status
Version No.
Date
Comments
Approved
1.0
01.07.2011
First approved version
Approved
2.0
27.07.2011
Page 15: Updated disassembly
sequence so that the CHASSIS
SIDE HOOK is removed before the
CHASSIS.
Page 9: Changed the EARPIECE
HOUSING LID name to the
EARPIECE BOOT.
Approved
3.0
18.08.2011
Page 23: Added solder
components
Approved
4.0
30.08.2011
Page 9: Added SENSOR FLEX
I0032 to the Exploded View
Approved
5.0
03.10.2011
Page 9: Added FRONT CAMERA
FLEX I0033 to the Exploded View
Page 18: Added disassembling
instructions for FRONT CAMERA
FLEX
Approved
6.0
21.10.2011
Assembly hints torque values
updated.
Approved
7.0
14.12.2011
Page 9: Removed SENSOR FLEX
I0032 from A1 assembly
Page 10: Added the unibody
opening tool SS-282
Disassembly: Changed the
DISPLAY ASSEMBLY removal
process. Added removing of the
SENSOR FLEX
Approved
8.0
20.07.2012
Updated operating times
The purpose of this document is to help NOKIA service levels 1 and 2 workshop technicians
to carry out service to NOKIA products. This Service Manual is to be used only by authorized
NOKIA service suppliers, and the content of it is confidential. Please note that NOKIA
provides also other guidance documents (e.g. Service Bulletins) for service suppliers, follow
these regularly and comply with the given instructions.
While every endeavor has been made to ensure the accuracy of this document, some errors
may exist. If you find any errors or if you have further suggestions, please notify NOKIA
using the address below:
Nokia Care Academy
service.manuals@nokia.com
Please keep in mind also that this documentation is continuously being updated and
modified, so watch always out for the newest version.