3 Make sure the contact area is facing up, and insert the SIM card into the SIM card
holder.
4 Insert the SIM card holder back into the phone. To lock the SIM card holder, slide
the holder to the right.
5 Close the cover of the micro-USB connector.
Remove the SIM card
1 Open the cover of the micro-USB connector.
2 To unlock the SIM card holder, slide the holder to the left. Carefully pull out the
holder.
3 Pull the card out.
Charge the battery
Your battery has been partially charged at the factory, but you may need to recharge
it before you can switch on your phone for the first time.
If the phone indicates a low charge, do the following:
Get started 9
To Next Page
Loading...
