Nokia N95 8GB - 3-D Tones; Modify the Standby Mode

To modify a profile, scroll to the profile, and select
Options > Customize. Scroll to the setting you want
to change, and press the scroll key to open the choices.
Tones stored in the mass memory of your device are
indicated with
.
In the tones list, select Download sounds (network
service) to open a list of bookmarks. You can select a
bookmark and start connection to a web page to
download more tones.
If you want the caller’s name to be spoken when your
device rings, select Options > Customize, and set Say
caller's name to On. The caller’s name must be saved
in Contacts.
To create a new profile, select Options > Create
new.
3-D tones
Press , select Tools > Utilities > 3-D tones.
With 3-D tones, you can enable three-dimensional
sound effects for ringing tones. Not all ringing tones
support 3-D effects.
To enable the 3-D effects, select 3-D ringing tone
effects > On. To change the ringing tone, select
Ringing tone and the desired ringing tone.
To change the 3-D effect that is applied to the ringing
tone, select Sound trajectory and the desired effect.
To modify the effect, select from the following settings:
● Trajectory speed — Scroll left or right to adjust the
speed at which sound moves from one direction to
another. This setting is not available for all ringing
tones.
● Reverberation — Select the type of echo.
● Doppler effect — Select On to have the ringing tone
sound louder when you are closer to your device,
and softer when you are farther away. When you get
closer to the device, the ringing tone appears to
become louder, and softer when you move away
from it. This setting is not available for all ringing
tones.
To listen to the ringing tone with the 3-D effect, select
Options > Play tone. If you enable the 3-D tones but
do not select any 3-D effect, stereo widening is applied
to the ringing tone.
To adjust the ringing tone volume, select Tools >
Profiles > Options > Customize > Ringing
volume.
Modify the standby mode
To switch the active standby on or off, press , and
select Tools > Settings > General >
Personalization > Standby mode > Active
93
Personalise your device