Nokia N97 mini - Page 248

provider. To obtain these addresses, contact your internet
service provider.
Proxy server address — Enter the address of the proxy
server.
Proxy port number — Enter the port number of the proxy
server.
WLAN internet access points
Select Menu > Settings and Connectivity >
Destinations > Access point, and follow the instructions.
To edit a wireless LAN (WLAN) access point, open one of
the access point groups, and select an access point marked
with
.
Follow the instructions from your WLAN service provider.
Select from the following:
Wi-Fi network name — Select Enter manually or
Search for networks. If you select an existing network,
WLAN network mode and WLAN security mode are
determined by the settings of its access point device.
Network status — Define whether the network name is
displayed.
Wi-Fi network mode — Select Ad-hoc to create an ad
hoc network and to allow devices to send and receive data
directly; a WLAN access point device is not needed. In an
ad hoc network, all devices must use the same WLAN
network name.
Wi-Fi security mode — Select the encryption used:
WEP, 802.1x, orWPA/WPA2 (802.1x and WPA/WPA2 are
not available for ad hoc networks). If you select Open
network, no encryption is used. The WEP, 802.1x, and
WPA functions can be used only if the network supports
them.
Homepage — Enter the web address of the starting page.
Use access point — Set the device to create a connection
using this access point automatically or after
confirmation.
Available options may vary.
Active data connections
Select Menu > Settings and Connectivity > Connection
mgr..
In the active data connections view, you can see the open
data connections:
data calls
packet data connections
wireless LAN (WLAN) connections
Note: The actual invoice for calls and services from your
service provider may vary, depending on network
features, rounding off for billing, taxes, and so forth.
To end a connection, select Options > Disconnect.
73
Connectivity