To set the image as a default call image to be used for every
call situation, select Options > Use image > Set as call
image.
To assign the image to a contact, Options > Use
image > Assign to contact.
To return to the viewfinder to capture a new image, press
the capture key.
Flash and video light
Keep a safe distance when using the flash. Do not use the
flash on people or animals at close range. Do not cover the
flash while taking a picture.
The camera of your device has a dual LED flash for low light
conditions.
To select the desired flash mode, tap the current flash
mode indicator, which is one of the following:
Automatic, Reduce red, On, and Off.
Avoid touching the flash LEDs when the back cover has
been removed. The LEDs may get hot after prolonged
usage.
Video light
To increase light levels when recording video in low light,
select
.
Scenes
A scene helps you to find the right color and lighting
settings for the current environment. The settings of each
scene have been set according to a certain style or
environment.
The default scene in image and video modes is
Automatic (indicated with
).
To change the scene, select
> Scene modes and a
scene.
To make your own scene suitable for a certain
environment, scroll to User defined, and select Edit. In
the user defined scene you can adjust different lighting
and color settings. To copy the settings of another scene,
select Based on scene mode and the desired scene. To
save the changes and return to the scenes list, select
Back. To activate your own scene, select User defined >
Select.
Capture images in a sequence
Select Menu > Applications > Camera.
Sequence mode is available only in the main camera.
To start capturing images in a quick sequence, select
> Sequence. To close the settings window, select
. Press and hold the capture key. The device captures
images until you select Stop or until the memory runs out.
104
Camera
To Next Page
Loading...
