EasyManua.ls Logo

Nomadelic Loud 705 - Page 3

Default Icon
7 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4 5
TWS connection
The speaker supports True Wireless Stereo (TWS). With TWS you can pair,
and play audio from, two speakers at the same time.
Note! The speakers cannot be separated more than 10 meters for the TWS
function to work. TWS only works with two of the same model speak-
ers (Nomadelic Loud 705). The TWS mode is only available when using
Bluetooth as the audio source.
1. Turn on both speakers. Make sure none of them are connected to a
smart device via Bluetooth.
2. Press and hold the Play/pause/TWS button (3) for 2 seconds on
the speaker you want to use as the primary speaker. The speaker
emits a short sound to indicate TWS mode is active. Release the
TWS button.
3. The speakers pair automatically together after a few seconds.
The speakers are now set up in stereo conguration where the
Bluetooth indicators (9) light up with a solid white light for
the right channel, and flashing white light every 3 seconds for
the left channel.
4. Activate Bluetooth on your smart device. Search for nearby
Bluetooth devices and select “Nomadelic Loud 705” in the list. A
sound from the speakers noties you when the pairing is
successful.
Any music you play on your Bluetooth connected smart device is now
played on both speakers simultaneously.
To disconnect the speakers from TWS mode, press and hold the Play/
pause/TWS button (3) on one of the speakers for 2 seconds; a sound is
emitted when the disconnection is successful.
3.5 mm AUX
Connect an audio cable between the 3.5 mm AUX port (5) and your
device. The speaker automatically disconnects any currently connect-
ed Bluetooth smart device. You can switch to the 3.5 mm AUX mode by
pressing the power button (2).
Troubleshooting
Problems with Bluetooth connection.
Make sure that the speaker’s built-in battery is fully charged, the speaker
is turned on, and that the LED indicator are light up. If there are several
Bluetooth smart devices around the speaker, deactivate Bluetooth on all
smart devices and try again.
The sound is breaking.
Make sure the distance between the speaker and the connected smart
device does not exceed 10 meters. Make sure that there are no obsta-
cles between the speaker and the device. Make sure that the speaker is
charged properly.
Safety information
The product contains a rechargeable Li-po battery and the battery can
not be replaced. Do not store the product with the battery completely
discharged for extended periods of time. Charge the speaker once every
3 months during extended periods of storage.
Never attempt to disassemble the product. Repairs should only be per-
formed by a qualied technician. By repairing it yourself there is a risk
of electric shock and/or short circuit.
Simplied EU Declaration of Conformity
Kjell & Company hereby declares that this device is in compliance with
the essential requirements and other relevant provisions of Directive
2014/53/EU. Full text of the EU declaration of conformity is available at
www.kjell.com/24450 or 24451.
ENGLISHENGLISH

Related product manuals