22
Bar Interval – 1, 10, 20, 30, 40, 50, 60 seconds. This is the amount of time each
bar represents.
Summary Interval – 5 min., 10 min., 30 min., 1 hour, 2 hours, 4 hours, 8
hours, 12 hours. Indicates how often a complete summary is saved in the
record.
LCD Impulse Time – 1-15 seconds in 1 second intervals. Amount of time the
Impulse screen displays results before being reset back to zeros. After being
reset back to zero, the impulse screen will continue to display maximum results
for impulse time setting.
Save Setup – Choose YES or NO to save the setup for later use. If you choose to
save settings, enter a name to identify the saved settings.
To Next Page
Loading...