32
memory is full, but it will write over the oldest events it has stored in
memory.
Use this option to see how much memory has been used and how much
remains at any given time. It also indicates whether or not Flash Wrapping
has been activated and how many waveforms or bar graph hours remain at
current settings before an overwrite will occur.
Use this option if you want to change the language displayed on the unit.
The languages available are English, French, Spanish, Italian and German.
After you change the language, all questions and display data will be in that
language.
Use this option to change the contrast on the LCD:
1. Lighter
2. Default
3. Darker
4. Save Changes
To Next Page
Loading...