6
This mode provides both the data collection from a period of time and
detailed analysis of events over their trigger level. The Super Graphics
program allows you to match these files together for a complete analysis.
6. After you select a mode, the screen will display MONITOR and EDIT.
MONITOR – The cursor will default to the MONITOR option. Press ENTER
to start monitoring. When you start monitoring, another sensor check will
be performed (which takes about 15 seconds) to ensure that nothing has
changed with the sensors.
EDIT – If you want to modify the settings, press the ↓ button to select
EDIT and press ENTER. With the EDIT option, a different screen will
display each time you press ENTER. Press ENTER to keep displayed data
or use the ↑ and ↓ keys to change a setting (use the + and - keys to move
the cursor from right to left). Standard selections are highlighted on each
screen. Continue pressing ENTER to proceed through all of the questions.
For numeric options, use the ↑ and ↓ arrow button to change the numbers.
See the Monitor Modes section for details about each available option.
When the SAVE SETUP screen displays, choose YES to can save the
current settings for future use. Enter up to 8 characters for the name of
To Next Page
Loading...