Nord Drivesystems SK 300P Series - Connection Accessories; Motor Cable; Low Voltage Cable; Daisy Chain Cable

NORDAC ON / ON+ (SK 3xxP) – Manual with installation instructions
146 BU 0800 en-4521
8.7 Connection accessories
The material for establishing the electrical connection is not included in the scope of delivery of the
frequency inverter. However, it can be obtained from NORD.
8.7.1 Motor cable
Pre-assembled cables for the motor connection are available (www.nord.com).
Designation
Plug connector
Document
UL FI side Motor side
SC H4S1 ST8SMM OE20A4 xxx UL X Pin, 8-pole Open ends, M20
1)
TI_275274690-692
SC H4S1 ST8SMM OE20A4 xxx UL
WOB
2)
X Pin, 8-pole Open ends, M20
1)
TI_275274617-619
SC H4S1 ST8SMM OE25A4 xxx UL
X
Pin, 8-pole
Open ends, M20
1)
TI_275274695-697
SC H4S1 ST8SMM OE25A4 xxx UL
WOB
2)
X Pin, 8-pole Open ends, M25
1
TI_275274621-623
SC H4S1 ST8SMM HQ8SMF xxx UL
X
Pin, 8-pole
Socket, 8-pole
TI_275274685-687
1) EMV – Cable glands
2)
Cables without braking power (WOB = without break)
8.7.2 Low voltage cable
Pre-assembled cables for the mains connection are available (www.nord.com).
Designation
Plug connector
Document
UL FI side Low voltage side
SC H6G2.5 NQ16SPF OE xxx UL
X
NQ16, Socket, 6-
pole
Open ends TI_275274218-221
8.7.3 Daisy chain cable
Pre-assembled cables are available to loop the mains connection from one device to the next
(www.nord.com).
Designation Plug connector Document
UL FI side (Out) FI side (In)
SC H6G2.5 NQ16SPM NQ16SPF xxx UL X
NQ16, Pin, 6-
pole
NQ16, Socket, 6-
pole
TI_275274288-291
8.7.4 Encoder cables
Pre-assembled cables for the connection of incremental encoders are available (www.nord.com).
Designation
Plug connector
Document
UL FI side Encoder side
SC S5Y0.25 M12-A5SMM M12-
A5SMF xxx
X
M12, Pin,
A-coded, 5-pole
M12, Socket,
A-coded, 5-pole
TI_275274874-879