Nord Drivesystems SK 300P Series - Replacing the Upper Device Part

NORDAC ON / ON+ (SK 3xxP) – Manual with installation instructions
148 BU 0800 en-4521
9.1.1 Replace upper part of the device
After the warranty period has expired, in case of a failure that cannot be remedied, you may return
only the upper part of the device to NORD Electronic DRIVESYSTEMS GmbH for repair.
For the replacement of the upper part, all cable connections from the base part to the upper part must
be disconnected.
Plug connection Function
1
24 V with daisy chain
2
Temperature sensor
3
Motor connection
4
Braking resistor connection (only Size 2 and above)
5
Mains connection with daisy chain
6
Brake connection (only Size 2 and above)
7
Encoder connection (only for NORDAC ON+)