Nord Drivesystems SK 510P - Abbreviations

Functional Safety – Supplementary manual for series SK 500P
60 BU 0630 en-2020
Pos: 37 5 /Anlei tung en/El ektr onik/S afety /11. Anh ang/ Abkür zunge n @ 16\mod_1487168269925_388.docx @ 2327336 @ 2 @ 1
9.6 Abbreviations
• AS-i
AS-Interface
• BW
Braking resistor
• DIN
Digital input
• DOUT
Digital output
• EMC
Electromagnetic compatibility
• FI
Frequency inverter
• GND
Ground
• OSSD
Output Signal Switching Device
• P
Parameter set dependent parameter, i.e. a parameter which can be assigned different
functions or values in each of the 4 parameter sets of the frequency inverter.
• PDS(SR)
Power Drive Systems (Safety Related) → Power drive systems with integrated safety
functions.
• S
Supervisor parameter, i.e. a parameter which is only visible if the correct Supervisor
Code is entered in parameter P003
• SH
Safe Stop (functional safety)
• SS1
Safe Stop 1
• STO
Safe Torque Off, torque safely switched off
• SW
Frequency inverter software or firmware version (“Software Version” (
P707
))
=== Ende der Lis te f ür T extm ar ke I nhal t == =