Nord Drivesystems SK 510P - RJ45 WAGO Connection Module; Table 17: RJ45 WAGO Connection Module

2 Assembly and installation
BU 0600 en-2319 53
2.7 RJ45 WAGO connection module
The frequency inverter is equipped with a CANopen interface on
the terminal rail. With the aid of the RJ45 WAGO module
installed near to the frequency inverter, NORD provides a
simple option for implementing signals on an RF45 connection
and implementing a CAN bus connect
ion via an RJ45 patch
cable.
The shield clamp should be used in order to ensure the correct
connection and relief of tension on the shield.
Contact 1 2 3 4 5 6 7 8 S
Meaning
CAN_H
CAN_L
CAN_GND
nc.
nc.
CAN_SHD
CAN_GND
CAN_24V
Shield
Supplier Designation Part no.:
WAGO Kontakttechnik GmbH
Ethernet connection module with CAGE CLAMP
connection
RJ45 transfer module
289-175
WAGO Kontakttechnik GmbH
Accessories: WAGO shield clamp
790-108
Alternative, complete connection module and shield clamp Material number
Getriebebau NORD GmbH &
Co.KG
Adapter module RJ45/terminal
278910300
Table 17: RJ45 WAGO connection module