Industrial gear units – Operating and Assembly Instructions
28 B 1050 en-1819
NOTICE!
Gear unit damage
For gear units with an integrated backstop, switching the drive motor to the blocked direction of rotation, i.e.
incorrect direction of rotation, may result in damage to the gear unit.
• Take care that the direction of rotation is correct.
NOTICE!
Gear unit damage
Damage to the gear unit due to aggressive or corrosive environments.
• Ensure that no aggressive or corrosive substances which attack metal, lubricants or elastomers are present in
the area surrounding the installation site or are subsequently expected during operation. In case of doubt,
please contact Getriebebau NORD and take the recommended action.
NOTICE! Gear unit damage
Gear units which are filled with VCI concentrate (long-term storage) are completely sealed for storage.
• Take care that the vent is fitted and released as necessary prior to commissioning the geared motor. The
installation position can be obtained from the specific dimension sheet for the order.
Pos: 54 /A llg em ein/ Allg em eing ülti ge M od ule/ ---------Seite numbruc h kom pakt --------- @ 13\ mod_1476369695906_0.docx @ 2265495 @ @ 1
To Next Page
Loading...