Nord Drivesystems SK 5207 - 6 Disposal; Table 13: Disposal of Materials

Industrial gear units – Operating and Assembly Instructions
82 B 1050 en-1819
6 Disposal
Observe the current local regulations. In particular, lubricants must be collected and disposed of
correctly.
Gear unit components Material
Gear wheels, shafts, rolling bearings, parallel keys,locking rings, …
Steel
Gear unit housing, housing components, …
Grey cast iron
Light alloy gear unit housing, light alloy gear unit housing components, …
Aluminium
Worm gears, bushes, ... Bronze
Shaft sealing rings, sealing caps, rubber components, …
Elastomers with steel
Coupling components
Plastic and steel
Flat seals
Asbestos-free sealing material
Gear oil
Additive mineral oil
Synthetic gear oil (adhesive label: CLP PG) Polyglycol-based lubricants
Synthetic gear oil (adhesive label CLP PG)
Poly-alpha-olefin based lubricants
Cooling spiral, embedding material of the cooling spiral, screw fittings
Copper, epoxy, yellow brass
Table 13: Disposal of materials
Pos: 208 /A nleit ung en/G etr ieb e/7. A nha ng/7. An hang @ 3\mod_1368691985561_388.docx @ 65721 @ 1 @ 1