Functional Safety – Supplementary manual for series SK 500P
58 BU 0630 en-2020
9 Appendix
Pos: 36 2 /Anlei tu nge n/El ektr onik /S afety /1 1. A nha ng/ Wart u ngshi nwei s e @ 1 6\mod_1488441976364_388.docx @ 2331139 @ 2 @ 1
9.1 Maintenance information
The maintenance information from the frequency inverter manual (BU 0600) apply.
The information on long-term storage also apply for the Safe Pulse Block.
Thus, the Pulse Block must be supplied with a voltage of 24 V DC at least 1 x per year for 60
minutes in order to maintain its function and to prevent damage to the Safe Pulse Block.
Pos: 36 3 /Anlei tung en/El ektr onik/B ussys teme/ All e B aurei he n/9. (7. ) An hang /R epar atur hi nwei s e @ 4 2\mod_1589956872993_388.docx @ 2612990 @ 2 @ 1
9.2 Repair information
In order to keep repair times as short as possible, please state the reason for returning the device and
at least one contact in case of queries.
In case of repair, please send the device to the following address:
NORD Electronic DRIVESYSTEMS GmbH
Tjüchkampstraße 37
26606 Aurich
Third party accessories
Getriebebau NORD GmbH & Co. KG cannot accept liability for third party accessories if these are
returned with the device.
Accompanying document
Please complete the accompanying document for the return. This can be found on our homepage
www.nord.com or directly under the link Warenbegleitschein
In case of queries about repairs please contact:
Getriebebau NORD GmbH & Co. KG
Tel.: +49 (0) 45 32/ 289-2515
Fax: +49 (0) 45 32 / 289-2555
Pos: 36 4 /Allg emein/ Allg emeing ültig e Module/---------Seitenum br uch k om pakt --------- @ 13\mod_1476369695906_0.docx @ 2265495 @ @ 1
To Next Page
Loading...
