NORDAC PRO (SK 500P) – Users Manual for Frequency Inverters
12 BU 0600 en-2319
1.2 Delivery
Check the equipment immediately after delivery / unpacking for transport damage such as
deformation or loose parts.
If there is any damage, contact the carrier immediately and carry out a thorough assessment.
Important! This also applies even if the packaging is undamaged.
1.3 Scope of delivery
Defect in the device
Use of unapproved accessories and options, e.g. options from other device series (SK CSX--0) may
result in defects of the interconnected components.
• Only use accessories and options which are explicitly intended for use with this device and are
stated accordingly in this manual.
Standard version: • IP20
• Integrated brake chopper
• Integrated EMC line filter for limit curve A1, or Category C2
• Blank cover for technology unit slot
• Covering for the control terminals
• Operating instructions on CD
To Next Page
Loading...
