Nord Drivesystems SK 530P - Additional Parameters

5 Parameter
BU 0600 en-2319 137
5.1.6 Additional parameters
P500 Language S P
Setting range
0 … 5
Factory setting
{ 0 }
Description Selection of the display language
Setting values
Value Meaning Value Meaning Value Meaning
0 = German 1 = English 2 = French
3 = Spanish 4 = Swedish 5 = Netherlands
P501 Inverter name
Setting range
A … Z
(char)
Arrays
[-01] … [-20]
Factory setting { 0 }
Description
Free input of a designation (name) for the device (max. 20 characters). With this, the
frequency inverter can be uniquely identified for setting with NORDCON software or
within a network.
P502 Master function value S P
Setting range
0 … 57
Arrays [-01] = Master value 1 [-02] = Master value 2 [-02] = Master value 3
[-04] =
Master value 4
[-05] =
Master value 5
Factory setting
all { 0 }
Description Selection of master values of a Master for output to a bus system (see P503). These
master values are assigned to the slave via P546.
Note
For details regarding the processing of setpoints and actual values, please refer to

Section 8.7.
Setting values
Value Meaning Value Meaning Value Meaning
00 =
Off
10 =
Reserved POSICON
21 =
Actual frequency without slip
master value
01 = Actual frequency 11 =
02 = Actual speed 12 = BusIO Out Bits0-7 22 = Speed encoder
03 = Current 13 =
Reserved POSICON
23 = Actual frequency with slip
04 =
Torque current
…
24 =
Master value actual frequency
with slip
05 =
Digital IO status
16 =
53 =
Actual value 1 PLC
06 =
Reserved POSICON
17 =
Value analogue input
1
… …
07 = 18 =
Value analogue input
2
57 = Actual value 5 PLC
08 = Setpoint frequency 19 =
Setpoint frequency
master value
58 = Clock input 1
09 = Error number 20 =
Setpoint frequency
after master value
ramp