Nord Drivesystems SK 530P - Page 177

5 Parameter
BU 0600 en-2319 177
P751 Counter statistics S
Display range
0 ... 9999
Arrays [-01] … [-25]
Description
Display of the frequency with which the errors according to P750 have occurred.
Note The arrays of parameters P750 and P751 are directly related.
Example: The number of error messages according to P750 [-01] are displayed in
P751 [-01].
P780 Inverter ID
Display range 0 … 9 and A … Z
(char)
Arrays
[-01] =
… [-14]
Description
Display of the serial number (14-digit) of the device.
Note
• Display via NORDCON: as a contiguous serial number of the device
• Display via Bus: ASCII code (decimal). Each array must be read out separately.
P799 Op.hrs. last fault
Display range
0.00 … 19 999 999.99 h
Arrays
[-01] … [-10]
Description
"Operating time, last fault". If an fault occurs a time stamp is set on the basis of the
on-time P714 and saved in P799. Array [-01]. [10] corresponds to the last faults
1 ... 10.