Nord Drivesystems SK 530P - Warning Information on the Product; Table 3: Warning Information on the Product

1 General
BU 0600 en-2319 21
1.6 Warning information on the product
The following warning information is used on the product.
Symbol
Supplement to
symbol
1)
Meaning
DANGER
300 s
DANGER
Electric shock
The device contains powerful capacitors. Because of this, there a
hazardous voltage may be present for more than 5 minutes after
disconnection from the mains.
• Before starting work, check that the device is free of voltage at all
power contacts by means of suitable measuring equipment.
It is essential to read the manual in order to prevent hazards!
HOT SURFACE
CAUTION
Hot surfaces
The heat sink and all other metal components can heat up to
temperatures above 70 °C. Risk of local burns on contact
• Allow sufficient cooling time before starting work on the device.
•
Check the surface temperatures with suitable measuring
equipment.
•
Maintain an adequate distance to adjacent components or
provide protection against contact.
NOTICE!
EDS
The device contains electrostatically sensitive components, which
can be easily damaged by incorrect handling.
• Avoid all contact (indirect contact by tools or similar, or direct
contact) with PCBs and their components.
1)
Texts are written in English.
Table 3: Warning information on the product