Nord Drivesystems SK 750E-751-323-A - Parameterisation; Information

7.9 Information
BU 0750 GB Technical design subject to change 123
Parameter
Setting value / Description / Note
Parameter
set
Available with option
P741 ... - 01
...
... - 06
PZD bus out 1...6
Always available
0 ... FFFF hex
This parameter provides information on the status
word currently being used and on the actual values
being transmitted via the bus systems
... - 01 = status word
... - 02 = actual value 1 (P543)
... - 03 = actual value 1 high byte
... - 04 = actual value 2 (P544)
... - 05 = actual value 3 (P545)
... - 06 = Bus-Out bit (P543-P545)
P742
Data base version
Always available
0 ... 9999
Display of the version of the internal database stored in the inverter.
P743
Inverter ID
Always available
0.00 ... 250.00
Display of the inverter output by wattage, such as "15" FI rating is 15 kW.
P744
Configuration
Always available
0 ... 9999
This parameter displays the optional subassemblies the FI is able to identify.
The ParameterBox will display this information in clear text.
The ControlBox will display the potential combinations in a coded form. The custom interface
being used is shown on the right. When the code includes the number 1 as the second digit,
this means that an encoder module is additionally installed, while the number 2 refers to the
PosiCon option.
No I/O XX00
Basic I/O XX01
Standard I/O XX02
Multi I/O XX03
USS I/O XX04
CAN I/O XX05
Profibus I/O XX06
Encoder 01XX
PosiCon 02XX
P745 ... - 01
... - 02
... - 03
Option Version 1...2
Always available
0 ... 32767
Software version of the subassemblies in-
stalled (not unless they are provided with a
processor of their own).
Array level: [01] Equipment box/TU
[02] Custom interface
[03] Special extension
P746 ... - 01
... - 02
... - 03
Option Status 1...3
Always available
0000 ... FFFF hex
State of subassemblies installed
(when activated)
Array level: [01] Equipment box/TU
[02] Custom interface
[03] Special extension
P747
Inverter Volt. Range
Always available
1 / 2
Displays the range of supply voltage for which the device in question is suitable ac-
cording to its specification.
1 = 200 … 240V 2 = 380 … 480V
P750
Stat. overcurrent
Always available
0 ... 9999
Number of overcurrent trippings in the course of an operating period
P751
Stat. Overvoltage
Always available
0 ... 9999
Number of overvoltage trippings in the course of an operating period