Nord Drivesystems SK 750E-751-323-A - Mounting and Installation; Mounting the SK 750 E Directly on the Motor

2 Mounting and installation
BU 0750 GB Technical design subject to change 17
2.6 Mounting the SK 750E directly on the motor
A suitable attachment frame and additional "motor attachment feet" enable the frequency inverter to be
mounted directly on the geared motor (integrated drive). Three different attachment frames are available al-
lowing for mounting the device to differently sized motors (132, 160, 180MX/LX).
Attachment frame
for device
Piece number
Attachm. frame-750E-BG1-IEC132
SK 750E-551-323-A ... SK 750E-751-323-A
SK 750E-551-340-A ... SK 750E-751-340-A
275218000
Attachm. frame-750E-BG1-IEC160
SK 750E-112-340-A ... SK 750E-152-340-A
275217000
Attachm. frame-750E-BG2-IEC160
SK 750E-921-323-A ... SK 750E-112-323-A
SK 750E-182-340-A ... SK 750E-222-340-A
275216000
Attachment frame-750E-BG1-IEC132
Attachment frame-750E-BG1-IEC160
Attachment frame-750E-BG2-IEC160