NORDAC SK 750E Manual
74 Technical design subject to change BU 0750 GB
Oscilloscope function
The function desired for recording can be selected
from various optional channel settings. Four chan-
nels are available in all with their range of values
and time base being scalable.
For long-term storage the curves can be saved to
memory along with the respective settings and re-
trieved again at a later date.
Parameterisation
With NORD CON all parameters of the in-
verter connected to the PC can be read,
changed, stored, or printed out for documenta-
tion purposes.
Each parameter of the frequency inverter has
got a name and a number of its own by which
it is accessed. Owing to the clear structure of
the NORD CON software manipulation is easy
and configuration of the inverter can proceed
in a most convenient fashion.
Moreover the parameter characteristics can
be enquired and display of the parameters
which are not currently needed can be sup-
pressed.
Macros
NORD CON includes macros which can be
used to develop simple process sequences for
integration into testing procedures during sys-
tem start-up.
To Next Page
Loading...
