NORDAC Control and Parameter Boxes
58 Subject to technical alterations BU 0040 GB-1611
4 Maintenance and servicing information
With proper use, the control and parameter boxes are maintenance-free
.
The device must be sent to the following address if it needs repairing:
NORD Electronic DRIVESYSTEMS GmbH
Tjüchkampstrasse 37
26605 Aurich, Germany
For queries about repairs, please contact:
Getriebebau NORD GmbH & Co. KG
Telephone: 04532 / 401 -515
Fax: 04532 / 401 -555
No liability can be accepted for attached components if a control or parameter box is sent in for repair!
NOTE
If possible, the reason for returning the component/device should be stated. If necessary, at
least one contact for queries should be stated.
This is important in order to keep repair times as short and efficient as possible.
On request you can also obtain a suitable return goods voucher from Getriebebau NORD.
Unless otherwise agreed, the device is reset to the factory settings after inspection or repair.
To Next Page
Loading...