1 General
BU 0505 EN-3021 11
Additional
options
Operating manual BU 0500
BU
0505
Safe pulse block (STO / SS1)*
2 x CANbus/CANopen interfaces via RJ45
plug
x x x x BU 0060
RS485 interface additionally via terminals
Speed feedback via incremental encoder
input
x x x
Integrated “POSICON” positioning control
CANopen absolute encoder evaluation
PLC / SPS – functionality
Universal encoder interface
(SSI, BISS, Hiperface, EnDat and SIN/COS)
x BU 0510
Operation of PM synchronous motors
(Permanent Magnet Synchronous Motors)
x x x x x x
Number of digital inputs / outputs** 5 / 0 5 / 0 5 / 0 7 / 2 7 / 2
7 / 1
Additional potential-isolated PTC input***
Number of analog inputs / outputs
* not with 115 V devices
** SK 54xE: 2 I/Os can be variably parameterised as inputs or outputs
*** alternative "thermistor" function on digital input 5 possible (above size 5 an additional thermistor input is available as
standard)
Table 2: Overview of SK 500E performance grading features
Pos: 21 /Anleitungen/ Elektronik/FU und St arter/1. Allgemeines/ Überblick -2- Abweichende Hardwareeigenschaf ten [SK 5xxE] @ 1\mod_1340695 009508_388.doc x @ 28170 @ @ 1
Differing hardware features
Version Description
SK 5xxE-…-CP
compared with SK 5xxE
• ColdPlate or external heat sink
SK 5x5E
compared with SK 5x0E
• External 24V supply voltage. Communication with the frequency inverter is
possible even without a power connection
comparison with sizes 1 –
4 (> 4 kW, 230V or
> 11 kW, 400V)
• Additional, separately mounted PTC input (potential isolated)
• External 24V supply voltage with automatic switchover to the internal 24V low
voltage generator on failure of the external control voltage.
• Processing of both bipolar and analog signals
• 2 x CANbus/CANopen interfaces via RJ45 plug as standard
Table 3: Overview of differing hardware features
Pos: 22 /Anleitungen/ Elektronik/FU und St arter/1. Allgemeines SK 5xxE mit bzw. ohne integr iertem Netzfilter @ 6\mod _1421331128135_3 88.docx @ 199338 @ 23335 @ 1