1 General
BU 0505 EN-3021 17
Designation Example Description
EMC Kit
Screening bracket for EMC-compliant connection
of shielded cables,
Type SK EMC2- …
(please see chapter 2.5 "EMC Kit")
Electronic brake rectifier
Direct control of electro-mechanical brakes
Type SK EBGR-1
Refer to Link
IO extension
External IO extension (analog and digital)
Type SK EBIOE-2
Refer to Link
Interface converter
Signal converter from RS232
Type SK IC1-232/485
Refer to Link
Setpoint converter ± 10 V
Signal converter to convert bipolar to unipolar
analog signals (only for FI Sizes 1 - 4),
Type setpoint converter ± 10 V
Refer to Link
Connection module V/F converter
Signal converter for conversion of the 0 – 10 V
analog signals from a potentiometer into pulse
signals for evaluation at the digital input of the
frequency inverter (SK 500E … SK 535E),
Type connection module V/F converter
Refer to Link
Connection module V/I converter
Signal converter to convert 0 – 10 V analog
signals to 0 – 20 mA signals, for example for
evaluation by a PLC with a current signal input,
Type connection module V/F converter
Refer to Link
RJ45 connection module
Adapter for single wire signal cables to RJ 45,
Type WAGO Ethernet connection module
with CAGE CLAMP connection
(please see chapter 2.11 "RJ45 WAGO-
Connection module")
Pos: 25 /Anleitungen/ Elektronik/FU und St arter/1. Allgemeines/ Lieferumfang/Lief erumfang Zubehör_ 12_Software [SK 1x0E, SK 2 xxE, SK 5xxE, SK 2xxE-FDS] @ 6\mod_143 0919001948_388.doc x @ 216247 @ @ 1
To Next Page
Loading...
