nord NORDAC PRO SK 511E Series - Brake Resistor Assignments; Dimensions of Chassis BR SK BR2; Table 9: Dimensions of Chassis Brake Resistor SK BR2

SK 54xE – Users Manual for Frequency Inverters
40 BU 0505 EN-3021
2.6.3 Dimensions of chassis BR SK BR2
Resistor type A B C
Fixing dimensions
Weight
D E
∅
SK BR2-100/400-C
178 100 252 150 90 4.3 1.6
SK BR2- 35/400-C
SK BR2- 60/600-C
385 92 120 330 64 6.5 1.7
SK BR2- 22/600-C
SK BR2- 30/1500-C
585 185 120 526 150 6.5 5.1
SK BR2- 12/1500-C
SK BR2- 22/2200-C
485 275 120 426 240 6.5 6.4
SK BR2- 9/2200-C
SK BR2- 12/4000-C
585
266
210
526
240
6.5
12.2
SK BR2- 8/6000-C
395
490
260
370
380
10.5
13.0
SK BR2- 6/7500-C
595 490 260 570 380 10.5 22.0
SK BR2- 3/7500-C
SK BR2- 3/17000-C
795
490
260
770
380
10.5
33.0
All dimensions in mm
[kg]
SK BR2-... FI size 3 and above
(Schematic diagram, model varies
according to power)
B
A
E
D
C
Table 9: Dimensions of chassis brake resistor SK BR2-...
Pos: 49 /Anleitungen/ Elektronik/FU und St arter/2. Montage und Inst allation/Zubehör/ Bremswiderstand/SK 500EZuordnung passende B remswiderstände [ SK 500E] @ 6\mod_1422021685 133_388.docx @ 200321 @ 3 @ 1
2.6.4 Brake resistor assignments
The brake resistor (BW) which is directly assigned to the frequency inverter according to the following
table is dimensioned for approx. 10% of the rated power of the inverter. It is therefore suitable for brief
brake operation or brake operation with a flat brake ramp, in which only a low total braking energy
occurs.