nord NORDAC SK 5xxE Series - Parameter Monitoring and User Settings; Basic Parameter Settings (Section 5.2); Motor Data;Characteristic Curve Parameters (Section 5.3)

5.9 Parameter monitoring, User settings
BU 0500 GB Subject to technical alterations 121
5.9 Parameter monitoring, User settings
(P)
⇒ Parameter set dependent, these parameters can be differently adjusted in 4 parameter sets.
S
⇒ Supervisor parameter, visibility depends on P003.
Setting after commissioning
Parameter
No.
Name
Factory
setting
Super-
visor
P 1 P 2 P 3 P 4
OPERATING DISPLAYS (5.1)
P000 Operating display
P001 Selection display 0
P002 Factor display 1.00 S
P003 Supervisor code 1
0= S parameters are hidden
1= all parameters are visible
BASIC PARAMETERS (5.2)
P100 Parameter set 0 S
P101 Copy parameter set 0 S
P102 (P) Acceleration time [s] 2.0
P103 (P) Deceleration time [s] 2.0
P104 (P) Minimum frequency [Hz] 0.0
P105 (P) Maximum frequency [Hz] 50.0
P106 (P) Ramp smoothing [%] 0 S
P107 (P) Brake reaction time [s] 0.00
P108 (P) Disconnection mode 1 S
P109 (P) DC brake current [%] 100 S
P110 (P) DC braking time on [s] 2.0 S
P111 (P) P factor torque limit [%] 100 S
P112 (P) Torque current limit [%] 401 (off) S
P113 (P) Jog frequency [Hz] 0.0 S
P114 (P) Brake ventilation time [s] 0.00 S
MOTOR DATA / CHARACTERISTIC CURVE PARAMETERS (5.3)
P200 (P) Motor list 0
P201 (P) Nominal motor frequency [Hz]
50.0 *
S
P202 (P) Nominal motor speed [rpm]
1385 *
S
P203 (P) Nominal motor current [A]
4.8 *
S
P204 (P) Nominal motor voltage [V]
230 *
S
P205 (P) Nominal motor power [kW]
1.10 *
P206 (P) Motor cos phi
0.78 *
S
P207 (P) Motor circuit [star=0/delta=1]
1 *
S
P208 (P)
Stator resistance [?]
6.28*
S
P209 (P) No load current [A]
3.0 *
S
P210 (P) Static boost [%] 100 S
P211 (P) Dynamic boost [%] 100 S
P212 (P) Slip compensation [%] 100 S