Nordic Vibroplate

MANUAL
TIME display window–
Time displays from 00minute
00second to 10minute.
SPEED display window–
Speed displays from 1 to 16 steps.
When use generally, display like this.
When setting the user program,
display like this. First letter is
flickered.You can set 3 user programs,
PU01~PU03
When use
Preset program mode &
User defined program mode, display
like this. First letter is flickered.
Preset program display from P01~P18
3 user programs display from
PU01~PU03.
START – Push this button
when start the machine.
STOP - Push this button
when stop the machine.
During working : Push the button, vibration
speed increases 0.5 step. Starts from step 1
and maximum steps are 16.
During stopping : Push the
button,increases the value of the mode you
setup
During working : Push the button, vibration
speed decreases 0.5 step.
ON step speed 1 push this button, machine
speed goes to 0(halted, not stopped).
During stopping : Push the button,
decreases the value of the mode you setup.
During working : Push the button,
vibration speed goes to step 4 automatically.
During stopping : Push the button,
set the value of the mode you setup.
During working : Push the button, vibration
speed goes to step 8 automatically.
During stopping : Push the button, the
mode will be changed. Mode circulates
TIME -> SETUP USER PROGRAM ->
PROGRAM/USER PROGRAM -> TIME
During working : Push the button, vibration
speed goes to step 12 automatically.
During stopping : Push the button,
reset the value of the mode you setup.
Initialize value you setup.
Display window
PROGRAM
display window
Button
description
05