NordicTrack 24032.0 - Page 10

10
7
7. Align the plastic post (F) inside the Right
Handrail Cover (7) with the indicated hole (G) in
the Right Shield Cover (76).
Press the Right Handrail Cover (7) onto the
Right Shield Cover (76) and onto the Right Outer
and Inner Shields (17, 19).
Attach the Right Handrail Cover (7) with an
M4 x 16mm Screw (67).
Attach the Left Handrail Cover (6) in the same
way.
67
17
7
6
19
76
F
G
8
8. Attach the Rear Upright Cover (21) to the Upright
(2) with five M4 x 16mm Screws (67); do not
tighten the Screws yet.
67
67
21
2