NordicTrack 360 - Page 10

10
9. Route the Press Arm Cable (66) through the
Top Cover (24) and over a 3 1/2" Pulley (43).
Attach the Pulley and a Cable Trap (47) to the
Top Frame (12) with an M10 x 40mm Screw
(97). Make sure that the Cable Trap is orient-
ed to hold the Cable in the groove of the
Pulley.
10. Route the Press Arm Cable (66) under a 3 1/2"
Pulley (43). Attach the Pulley, a Cable Trap
(47), and two Finger Guards (48) to the second
hole from the top of the Weight Tube (16) with
an M10 x 50mm Bolt (96) and an M10 Locknut
(108). Make sure that the Cable Trap is ori-
ented to hold the Cable in the groove of the
Pulley.
8. Route the Press Arm Cable (66) over a 3 1/2"
Pulley (43). Attach the Pulley and a Cable Trap
(47) to the Top Frame (12) with an M10 x 40mm
S
crew (97). Make sure that the Cable Trap is
oriented to hold the Cable in the groove of
t
he Pulley.
12
8
9
24
66
66
16
48
48
47
96
108
12
66
47
4
3
43
43
97
47
97
10