16
15. Align the upper end of the Storage Latch (56)
with the bracket on the Frame (52). Insert a
5/16" x 2 1/4" Bolt (4) through the bracket. This
should push a spacer (I) out of the other end.
Discard the spacer.
Attach the Storage Latch (56) with the 5/16" x 2
1/4" Bolt (4) and a 5/16" Nut (9).
Lower the Frame (52) (see HOW TO LOWER
THE TREADMILL FOR USE on page 40).
56
15
52
4
9
I
130
133
16. Set the TV (133) face down on a soft surface to
avoid scratching the TV. Remove and save the
four M4 x 12mm Screws (130). The Screws will
be used in step 17.
16
To Next Page
Loading...
