14
11. With the help of a second person, hold the con-
sole assembly near the left Handrail (86).
Make sure that the pulse wire (D) is inserted
through the three looped Cable Ties (99).
Route the pulse wire (D) as shown, and insert
the pulse wire into the gap indicated by the
arrow.
Console
Assembly
86
D
99
11
10. Set the console assembly face down on a soft
surface to avoid scratching the console
assembly.
Attach the Right and Left Trays (27, 36) with
eight #8 x 1/2" Screws (1). Do not overtighten
the Screws.
Remove the four indicated 1/4" x 1/2" Screws
(31) from the Console Frame (18); the Screws
will be used in a later step.
Console
Assembly
1
10
31
31
1
1
18
1
27
36
99
To Next Page
Loading...
