10
7. Attach the Base Cover (84) to the Base (94)
with four #8 x 1/2" Screws (1). Be careful not
to overtighten the Screws.
W
ith the help of a second person, tip the tread-
mill so that the Base (94) is flat on the floor.
8
4
94
1
1
1
1
7
8. Identify the Right and Left Upright Covers (86,
87). Slide the Right Upright Cover onto the Right
Upright (83) as shown. Slide the Left Upright
Cover onto the Left Upright (82) as shown.
82
87
86
83
8
To Next Page
Loading...
