NordicTrack A2550 Pro Treadmill - Page 12

12
12. See steps 5 and 6. Tighten all the Bolts used in
these steps.
Attach the Left Accessory Tray (101) and the
Right Accessory Tray (104) to the console as-
sembly with eight #8 x 1/2" Screws (1).
104
1
1
101
1
1
12
Console
Assembly
11. Set the console assembly on the Left and Right
Uprights (82, 83). Be careful not to pinch any
wires. Insert the excess wire into the Right
Upright.
Start two 5/16" x 3/4" Patch Bolts (5) with two
5/16" Star Washers (9) into the Right Upright
(83). Then start a 5/16" x 1 1/2" Patch Bolt (4)
i
nto the Right Upright. Repeat this step on the
left side of the treadmill. Then, firmly tighten
all six Patch Bolts.
11
5
83
4
82
4
9
9
5
Console
Assembly