4. 4
HoldtheLeftUpright(89)againsttheBase
(97).Becarefulnottopinchthewires.Ifnec-
essary,positiontheBaseGroundWire(94)in
theholeinthesideoftheLeftUpright.Insert
two3/8"x23/4"Bolts(7)andtwo3/8"x 1 1/4"
Bolts(8)withtwo3/8"StarWashers(12)into
theLeftUpright.
Partiallytightenthe3/8"x2 3/4"Bolts(7)and
the3/8"x 11/4"Bolts(8)untiltheheadsofthe
BoltstouchtheLeftUpright(89);do notfully
tightentheBoltsyet.
Attach the Right Upright (not shown) in the
same way. Note: There are no wires on the
right side.
12
97
.
Identify the Left Base Cover (92) and the Right
Base Cover (93). Slide the Left Base Cover onto
the Left Upright (89). Slide the Right Base Cover
onto the Right Upright (90). Do not press the
Base Covers into place yet.
92
To Next Page
Loading...
