16
14. Attach the Pulse Crossbar (93) to the console
assembly with four #8 x 1/2" Screws (1); start all
four Screws, and then tighten them.
Then, firmly tighten the four 5/16" x 3/4"
Screws (4).
14
93
Console
Assembly
4
4
1 1
15. Firmly tighten the six 3/8" x 4" Screws (7)
(only one side is shown).
Then, press the Left Base Cover (82) and the
Right Base Cover (83) onto the Base (94).
15
83
82
94
7
16
16. Orient the Latch Assembly (62) as shown. Attach
the Latch Assembly to the Left Upright (89)
with two 1/4" Star Washers (3) and two 1/4" x
4 1/2" Screws (6); start both Screws, and then
tighten them.
62
89
6
3
To Next Page
Loading...
