17
18. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the oor or carpet, place a mat under the treadmill. To
avoid damage to the console, keep the treadmill out of direct sunlight. Keep the included hex keys in a secure
place; one of the hex keys is used to adjust the walking belt (see pages 32 and 33). Note: Extra parts may be
included.
17. Attach the Tablet Holder (53) to the back of the
console assembly with four #8 x 1/2" Machine
Screws (38); start all four Screws, and then
tighten them. Be careful not to overtighten
the Screws.
17
53
38
38
Console
Assembly
To Next Page
Loading...
