14
15. Attach the upper end of the Storage Latch (95)
to the bracket on the Latch Crossbar (41) with a
5/16" x 2 1/4" Bolt (63) and a 5/16" Nut (34).
Lower the Frame (56) (see HOW TO LOWER
THE TREADMILL FOR USE on page 22).
41
63
56
34
95
15
14. Orient the Storage Latch (95) so that the decals
are facing away from the treadmill as shown.
Attach the lower end of the Storage Latch (95) to
the bracket on the Base (94) with a 5/16" x 1 3/4"
Bolt (62) and a 5/16" Nut (34) as shown.
Raise the Storage Latch (95) to a vertical posi-
tion. Then, remove the tie from the top of the
Storage Latch.
94
95
62
Decals
34
Tie
14
To Next Page
Loading...
