14
17. Remove and discard the four indicated Screws
(C).
Attach the Rear Feet (57) to the Frame (56) as
s
hown with four #8 x 3/4" Screws (2).
Lower the Frame (56) (see HOW TO LOWER
THE TREADMILL FOR USE on page 29).
17
5
7
2
C
C
2
57
56
19. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill.
Note: Extra hardware may be included. Keep the included hex keys in a secure place; one of the hex keys is
used to adjust the walking belt (see pages 31 and 32).
18. Press the Grommet (77) into the square hole in
the Base (94).
94
77
18
To Next Page
Loading...
