.
7
Raise the Frame (52) to the position shown.
Have a second person hold the Frame until
step 8 is completed.
Orient the Storage Latch (49) so that the large
barrel and the latch knob are in the positions
shown.
Attach the lower end of the Storage Latch (49) to
the Upright (73) with a 3/8" x 2" Bolt (24) and a
3/8" Nut (6).
Latch
Knob
49
e
Barrel
24
.
Attach the upper end of the Storage Latch (49)
to the Frame (52) with a 3/8" x 1 3/4" Bolt (4)
and a 3/8" Nut (6). Note: It may be necessary
to move the Frame back and forth to align the
Storage Latch with the Frame.
Lower the Frame (52) (see HOW TO LOWER
THE TREADMILL FOR USE on page 22).
10
To Next Page
Loading...
