10
3. Identify the Left and Right Upright Covers
(82, 83).
Slide the Left Upright Cover (82) onto the left
Upright (89). Slide the Right Upright Cover (83)
onto the right Upright.
Then, press the Left and Right Upright Covers
(82, 83) downward until they snap into place.
82
3
83
89
4. Cut the tie securing the Upright Wire (81) to the
left Upright (89). Be careful not to damage
the Upright Wire. Also, make sure that the
Upright Wire does not fall into the Upright.
Identify the left handrail assembly (A).
Hold the left handrail assembly (A) near the left
Upright (89). Insert the Upright Wire (81) upward
through the large hole in the top of the left hand-
rail assembly.
Tip: Avoid pinching the Upright Wire (81).
Attach the left handrail assembly (A) to the left
Upright (89) with two 5/16” x 2 3/4” Screws (28)
and two 5/16” Star Washers (11); do not tighten
the Screws yet.
Remove the two indicated screws (B) from
the left handrail assembly (A), and discard the
screws.
28
11
A
89
Tie
81
4
B
To Next Page
Loading...
