11
5. Attach the right handrail assembly (C) to the right
Upright (89) with two 5/16" x 2 3/4" Screws (28)
and two 5/16" Star Washers (11); do not tighten
the Screws yet.
Remove the two indicated screws (B) from the
right handrail assembly (C), and discard the
screws.
5
89
C
B
28
11
64
93
D
D
D
6
6. Set the Console Base (64) face-down on a soft
surface to avoid scratching the Console Base.
Remove the four screws (D) from the Pulse
Crossbar (93), and discard the screws. Then,
remove the Pulse Crossbar.
Next, remove the four screws (E) from the
Console Frame (104), and discard the screws.
104
E
E
To Next Page
Loading...
