NordicTrack C1630PRO - Page 16

16
17. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill.
Note: Extra parts may be included. Keep the included hex keys in a secure place; one of the hex keys is used
to adjust the walking belt (see pages 31 and 32).
16. Attach the upper end of the Storage Latch (53)
to the Frame (56) with a 3/8" x 1 3/4" Bolt (6)
and a 3/8" Nut (12). Note: It may be necessary
to move the Frame back and forth to align the
Storage Latch with the Frame.
See HOW TO LOWER THE TREADMILL FOR
USE on page 29. Lower the Frame (56).
16
6
12
53
56
15. Raise the Frame (56) to the position shown.
Have a second person hold the Frame until
step 16 is completed.
Next, orient the Storage Latch (53) so that the
large barrel and the latch knob are in the posi-
tions shown.
Attach the lower end of the Storage Latch (53)
to the Upright (89) with a 3/8" x 2" Bolt (3) and a
3/8" Nut (12).
15
53
Large
Barrel
56
Latch
Knob
89
12
3