9
• Assembly requires two persons.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you nish all assembly steps.
• The underside of the walking belt is coated with
high-performance lubricant. After shipping, there
may be some lubricant on top of the walking belt
or on the shipping carton. This is normal. If there
is lubricant on top of the walking belt, wipe it off
with a soft cloth and a mild, non-abrasive cleaner.
• Left parts are marked “L” or “Left” and right parts
are marked “R” or “Right.”
• To identify small parts, see page 8.
• Assembly requires the following tools:
the included hex key
one adjustable wrench
one Phillips screwdriver
To avoid damaging parts, do not use power tools.
2. Make sure that the power cord is unplugged.
With the help of a second person, raise the
Uprights (89) to the vertical position.
Attach the left Base Leg (100) to the left Upright
(89) with two 5/16" x 1" Screws (7).
Attach the right Base Leg (not shown) to the
right Upright (89) in the same way.
2
100
89
7
ASSEMBLY
1. Go to www.nordictrackservice.com/
registra-tion on your computer and register
your product.
• activates your warranty
• saves you time if you ever need to contact
Customer Care
• allows us to notify you of upgrades and offers
Note: If you do not have Internet access, call
CUSTOMER CARE (see the front cover of this
manual) and register your product.
1
To Next Page
Loading...
