ASSEMBLY
Assembly requires two persons. Set the treadmillin a cleared area and remove all packingmaterials. Do not
dispose of the packing materials until assembly is completed.
Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a
small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal
condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off
the lubricant with a soft cloth and a mild, non-abrasive cleaner.
Assembly requires the included hex key -_ and your own phillips screwdriver _ , rubber
/
mallet _ and adjustable wrench _. For help identifying the assembly hardware, see
the drawings below. The numberin parenthesesbelow each drawingisthe key numberofthe part,from the
PART LIST on pages 30 and 31, The numberfollowingthe parenthesesisthe quantityneeded forassembly.
Note: Some small parts may have been pre-assembled. If a part is not in the parts bag, check to see if it
has been pre-assembled. To avoid damaging plastic parts, do not use power tools for assembly. Extra
hardware may be included.
3/4" Screw (7)-6
5/16" Star 3/8" Star Nut (91)-4
Washer (110)-4 Washer (67)-4
1" Tek Screw (82)-6
Base Cover Screw (63)-4
Console Bolt (72)-4
Nut (20)-2
Latch Bolt (109)-2
Extension Leg Bolt (87)-4
1. Make sure that the power cord is unplugged.
With the help of a second person, carefully tip
the treadmill onto its side as shown. Partially fold
the Frame (55) so that the treadmill is more sta-
ble. Do not fully fold the Frame until the
treadmill is completely assembled.
Insert an Extension Leg (97) into the indicated
bracket on the base of the Uprights (85). Make
sure that the Extension Leg is turned so the Base
Pad (81) is on the side shown. If necessary, use
a rubber mallet to align the holes in the
Extension Leg with the holes in the bracket.
Attach the Extension Leg (97) withtwo Extension
Leg Bolts (87), two 5/16" Star Washers (110),
and two Extension Leg Nuts (91) as shown.
Firmly tighten the Extension Leg Bolts.
6
To Next Page
Loading...
