6
1.
Orient the Right Front Stabilizer (40) with the
Wheel (17) positioned as shown.
A
ttach the Right Front Stabilizer (40) to the right
side of the Frame (1) with three M8 x 16mm
Patch Screws (54) and three M8 Split Washers
(55).
Attach the Left Front Stabilizer (not shown)
to the left side of the Frame (1) in the same
way.
40
54
1
1
55
55
54
17
To make assembly easier, read the
information on page 5 before you begin
a
ssembling the exercise cycle.
2. While another person lifts the rear of the Frame
(1), attach the Rear Stabilizer (16) to the Frame
with four M8 x 55mm Patch Screws (52) and
four M8 Split Washers (55).
2
55
55
16
52
1
To Next Page
Loading...
