16
H
OW TO TURN ON THE POWER
IMPORTANT: If the exercise cycle has been
exposed to cold temperatures, allow it to warm to
r
oom temperature before turning on the power. If
you do not do this, you may damage the console
d
isplays or other electrical components.
Plug in the power adapter (see HOW TO PLUG IN
THE POWER ADAPTER on page 13). When the
power adapter is plugged in, the displays will light and
the console will be ready for use.
Note: The console can display speed in either kilome-
ters or miles. To find out which unit of measurement is
selected or to change the unit of measurement, see
HOW TO CHANGE CONSOLE SETTINGS on page
21.
HOW TO USE THE MANUAL MODE
1. Begin pedaling or press any button on the
console to turn on the console.
See HOW TO TURN ON THE POWER above.
2. Select the manual mode.
Each time you turn on the console, the manual
mode will be selected.
If you have
selected a
workout,
reselect the
manual mode
by pressing
any of the
Workouts
buttons
repeatedly
until zeros
appear in the
display.
3
. Begin pedaling and change the resistance of
the pedals as desired.
As you pedal, change the resistance of the pedals
b
y turning the resistance dial.
T
o increase the resistance, turn the resistance dial
clockwise; to decrease the resistance, turn the
resistance dial counterclockwise. Note: After you
change the resistance, it will take a moment for
the pedals to reach the selected resistance level.
4.
Follow your progress with the displays.
The console offers several display modes. The
display mode that you select will determine which
workout information is shown. Press the Display
button repeatedly to select the desired display
mode.
The displays can show the following workout infor-
mation:
Time—When the manual mode is selected, this
display will show the elapsed time. When a work-
out is selected, the display will show the time
remaining in the workout instead of the elapsed
time.
Speed—This display will show your pedaling
speed, in kilometers per hour (KM/H) or miles per
hour (MPH).
Distance—This display will show the distance you
have pedaled, in kilometers or miles.
Calories—This display will show the approximate
number of calories you have burned.
Watts—This display will show your approximate
power output in watts.
To Next Page
Loading...
